Smith HPW-60A, Руководство пользователя

Страница: 14 / 23

Directions for use
Caution
Before using the water heater, ensure it is filled with water and that the power plug has been
connected properly.
Initial power up
When the heater is connected to the power source for the first time, the electronic controller will detect
the system. All screen indicators will glow momentarily.
If the heat pump system is disconnected from the power source at this point, all settings revert to
factory settings. Programmed settings will only be retained if heater remains switched on for over 4
hours. The system can keep clock settings for 72 hours without power.
Heating indicator Hot water indicator
2. Power on/off
Press the power button to turn the water heater on. The actual temperature and setting/preset
temperatures are displayed and if the actual water temperature in the tank is lower than the preset
temperature, heating begins and the heating indicator is lit.
By default, the water heater is set to ‘Efficiency’ mode, Time: 12:00 and Temperature: 70°C.
Power Decrease Increase
14
Fig. 10