Smith HPW-60A, Руководство пользователя

Страница: 4 / 23

User guide
Please read the instructions carefully before the installation or operation of this heat pump Water
Heater. This manual is meant for your future reference.
•
Only professional installers recommended by AOS Bath will install the AOS heat pump for you.
For improper installation of the heater by unauthorized personnel, AOS Bath will not be
responsible.
•
If the user installs the heat pump system manufactured by themselves or does it by using the
self-prepared installation materials, AOS Bath will not be liable for any adverse effects on the
normal operation and service performance of the heater, including but not limited to pipeline
leakage, fall or improper installation thereof, and harmful effects on or damage to the body of the
heat pump system as well as all losses incurred thereby.
•
After installation and operation of the heat pump system, users should inspect the heat pump
system regularly and make necessary maintenance checks according to the service conditions. If
any abnormality occurs, stop the operation of the heater immediately, and contact the local
authorized dealer for repair to ensure the normal, safe, and reliable operation of the system.
•
The anode rod is a consumable part and should be examined and replaced at fixed periods.
Consumers should register and replace the anode rod by contacting the local authorized dealer.
In this way, the service life of the heat pump system will be extended effectively.
•
Prior to any maintenance or repair of the heat pump system, please cut off the power supply.
Installers who are not recommended by AOS Bath should not adjust and repair the heater.
•
In case the heat pump water heater is subject to dry heating, the generated steam or burning
water may lead to serious scalds. Therefore, it is necessary to fill the heat pump system with
water. If dry heating occurs, cut off the power and water supply at once, stop the operation,
contact the local authorized dealer and carry out inspection or repair by AOS Bath’s
acknowledged professional installers.
•
Any component soaked into water in the tank can only be used after being inspected or repaired
by AOS Bath’s acknowledged professional installers.
•
Any damaged cords must be replaced by the repair department and professional staff
acknowledged by AOS Bath. Primary components of the heat pump system are protected by an
insulation layer and thermal protective coating.
•
The heat pump system is equipped with a relief valve. To ensure safe operation of the system, the
mounting position of the valve shall not be changed without permission, and the blockage of
valve outlet is strictly prohibited. A discharge pipe shall be provided for the relief valve, mounted
downwards continuously. The discharge pipe shall be directly connected to the floor drain.
4