Smitec FLXMOD MST S4 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 32

FLXMOD MST S4 series Installation, use and maintenance manual - EN
Ver. 1.01 6
5 Safety instructions
5.1 General information
5.2 Precautions during handling and assembly
Do not install or use the equipment before integrally reading and understanding this manual.
In case of difficulties of interpretation, contact SMITEC technical service.
It is absolutely forbidden to use the equipment for different purposes than the ones de-
scribed in this manual. The technical data and the drawings in this manual might have been
modified later; always refer to the latest version. All upgrades can be requested to SMITEC
S.p.A. directly.
Make sure that the personnel is qualified and adequately informed about the risks he may
run and how to avoid them.
FLXMOD MST S4 industrial PCs can be used only after the classification of the machine
operating area and after checking the safety levels, which must correspond to the assembly
safety levels.
Use adequate tools during the assembly, in order to avoid crushing or abrasions.
Metal components and sharp surfaces may cause cuts and tears. In case of contact, be very
careful and wear the personal protection equipment.