Smitec FLXMOD MST S4 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 9 / 32

FLXMOD MST S4 series Installation, use and maintenance manual - EN
Ver. 1.01 9
7 Technical data
7.1 Environmental specifications
7.2 Electrical specifications
The specifications below refer to the MST S4 unit alone, without any peripheral unit connected.
All the technical data in this section correspond to the hardware configuration of the MST
S4 manufactured on the date when this manual was drawn up. To improve or update this
product, SMITEC S.p.A. reserves the right to modify its technical features without notice.
Operating temperature 0° ÷ +40°C when it is operating
Storage temperature -20° ÷ +85°C when it is not operating
Relative humidity 0 ÷ 95% (without condensation)
Housing Polyamide (PA66) and aluminum
Protection degree IP20 according to IEC 60529
Altitude (operation)
Up to 2000 m above sea level (corresponding to an
atmospheric pressure from 80 to 106 kPa)
Altitude (storage and transportation)
Up to 3000 m above sea level (corresponding to an
atmospheric pressure from 70 to 106 kPa)
Mains voltage 24 VDC (- 15% ÷ +20% according to IEC 61131-2)
Absorbed current Max 0.50A @ 24VDC
Absorbed power Max 12W
Ripple
Max 5% of the supply voltage according to IEC
61131-2