Smitec FLXMOD MST S4 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 30 / 32

FLXMOD MST S4 series Installation, use and maintenance manual - EN
Ver. 1.01 30
• STEP 3
Once the new battery has been correctly inserted, repeat each operation described in every part inversely.
Then manually update the date and time using the operating system.
Gently remove the battery with pliers, being careful not to drop
it into the device
Insert the battery in the housing indicated in the figure, paying
attention to the polarity and then to the direction in which the
battery is inserted. See the following images:
Battery side with positive polarity (+):
the pole (+) is facing the computer heatsink
Battery side with negative polarity (-):
the pole (-) is facing the printed circuit of the
internal card
- +