Smitec FLXMOD MST S4 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 25 / 32

FLXMOD MST S4 series Installation, use and maintenance manual - EN
Ver. 1.01 25
9.2 Environmental requirements
In order for the system to operate properly, the MST S4 module must remain within the temperature limits in-
dicated in the specifications. This means that, inside the electrical cabined where the module is installed, there
should be a suited cooling system in order to keep the temperature within the correct limits.
9.3 Electrical wiring
The main connections for the MST S4 operation are the power supply and the earth; make these connections
following the instructions on polarity, conductors and connectors stated in the chapter “Connections”. Before
switching on the computer, make sure that the mains voltage is within the parameters indicated in the
specifications.
The device connection to the peripheral units is simplified by the use of standard computer connectors; this
means that all standard peripheral for personal computers can be connected by means of the cable supplied
with them or by means of commercial cables easily found on the market.
For connections to non-standard devices, such as inverters or other that require particular combinations of sig-
nals and cable lengths, it is possible to make them following the instructions stated in the chapter “Connec-
tions”.
DIN rail