Smeg PROFESSIONAL GLASSWASHER, Руководство по эксплуатации

Страница: 9 / 31

8
Caution:
make sure that the intake and drain hoses are not bent, constricted or crushed
after installation.
When installing the drain hose to a siphon with valve, the maximum height of the drain outlet is
reduced to 600 mm.
4.2 Electrical connection
The glasswasher and any additional equipment must be connected to the electrical
system
by authorised, skilled staff, in accordance with the relevant regulations; also
comply with the technical instructions for the connection.
The total rated power is stated on the appliance’s technical data plate.
The electrical protection devices fitted for the glasswasher must serve this appliance
only.
The user must have a
master switch and a differential safety breaker, with rating
suitable for the appliance’s characteristics, installed on the electricity supply line in
accordance with the relevant regulations.
These switches must be installed close to the glasswasher, be easily accessible after
installation, and provide complete disconnection from the electrical mains in
overvoltage class III conditions.
Warning !!!
The glasswasher is always powered up unless the master switch is turned off.
Connect the appliance to the user’s earth system. The terminal for the connection is
in the bottom right-hand corner of the appliance.
The earth wire (PE) is yellow-green in colour, the neutral wire (N) is blue and the live
wires (L1, L2, L3) are black, grey and brown.
In the event of single-phase connection (230V-1N~),
the connection to the electrical
mains
must be made using a cable with plug
compliant with the relevant regulations
.
THE POWER SUPPLY CABLE, AS PROVIDED, MUST BE REPLACED BY THE
MANUFACTURER OR AN AUTHORIZED SERVICE CENTER IN COMPLIANCE WITH THE
SPECIFICATIONS PROVIDED ON ELECTRICAL DIAGRAM SUPPLIED IN THE MACHINE IN
ORDER TO PREVENT ALL RISKS.