Smeg PROFESSIONAL GLASSWASHER, Руководство по эксплуатации

Страница: 26 / 31

25
When pump-out is complete the appliance switches to
“
OFF ” status.
Topping up with regenerating salt (for models with water softener)
Salt must be added when the “no salt” light ( ) appears on the display.
Top up with salt when there is no water in the tank to prevent washing water from getting into the
water softener device.
Caution: use only salt of the specific type, do not use cooking salt.
The salt tank has a capacity of about 1 kg of coarse-grained salt .
The salt tank is in the bottom of the appliance's tank. After removing the basket, undo the cap and pour
the salt in using the funnel supplied. Remove any salt residues around the opening before screwing the
cap back on.
11 MAINTENANCE AND CLEANING
Although no particular scheduled maintenance is required, users are advised to have the glasswasher
checked by a specialist technician twice a year.
N.B. the manufacturer accepts no liability for wilful damage or damage deriving from carelessness,
neglect, failure to comply with instructions, regulations and standards or incorrect connections.
11.1 Daily cleaning
The glasswasher has IPX4 protection, but the use of direct water jets for cleaning is forbidden .
Cleaning the filter during the day
In case of particularly heavy-duty working conditions, the filter should be cleaned every 30-40 cycles,
keeping the machine in operating conditions; to do this, carry out the “partial tank pump-out” routine
(program “P0”).
Press the button, and hold it down, until “P0” and the
duration of 1’ appear on the display.
Confirm by pressing ; light
L2
turns orange.
At the end of the pump-out the word “End” flashes on
the display. The display returns to showing “P1” . Clean