Instruction for the user
50
11.2.2
Grids
Remove the grids and clean them in warm water with a non-abrasive detergent, taking care to remove
any incrustations. Replace them on the cooking hob.
Continuous contact of the grids with the flame can cause the paint near the hot areas to be altered.
This is completely natural and does not compromise the functionality of the component.
11.2.3
Burner caps and flame cap crowns
The caps and flame-spreader crowns are extractable to facilitate cleaning.
Wash them in hot water with non-abrasive detergent, taking care to
remove any incrustations, and wait until they are
perfectly dry
.
CAUTION: do not wash these components in a dishwasher.
The burners can be left to soak in hot water and detergent.
Replace the flame-spreader crowns, checking that they are positioned in
their housing with their respective caps, taking care that flame-spreader
holes
A
correspond to the spark plugs and the thermocouples.
11.2.4
The spark plugs and thermocouples
To function properly the spark plugs and thermocouples must always be clean (on
the models which are equipped with them). Check them regularly and clean with a
damp cloth if necessary. Any dry residues can be removed with a toothpick or a
needle.
11.3
Cleaning of oven
For best oven upkeep clean regularly after having allowed to cool. Take out all removable parts.
Clean the oven grill with hot water and non-abrasive detergent. Rinse and dry.
11.4
Door glass
The door glass should always be kept clean. Use absorbent kitchen paper to clean. In case of tough
spots, clean with a damp sponge using regular detergent.
