Instruction for the user
37
5
DESCRIPTION OF FRONT PANEL CONTROLS
All the oven controls are grouped together on the front panel. The table below provides a description
of the symbols used.
FRONT RIGHT BURNER
GAS OVEN THERMOSTAT KNOB
BACK RIGHT BURNER
OVEN LIGHT / ROTISSERIE / GRILL
SWITCH
BACK LEFT BURNER
BURNER IGNITION BUTTON
FRONT LEFT BURNER
ANALOGUE CLOCK
CENTRAL BURNER
MINUTE COUNTER KNOB
If the cooker is equipped with an electronic programmer, before using the oven make sure
that the symbol
; appears on the display. See paragraph “8.1 Clock adjustment”.
COOKING HOB BURNER COMMAND KNOB
(CERTAIN MODELS ONLY)
The flame is lit by pressing the knob and turning it anticlockwise to minimum
flame
. To adjust the flame turn the knob between maximum ( ) and minimum
(
). The burner goes out when the knob is returned to the position .
BURNER IGNITION BUTTON
(CERTAIN MODELS ONLY)
In the models fitted with this button ( ), the flame is ignited by turning
the knob anticlockwise to the minimum flame setting
, while
simulta-neously pressing this button ( ). To adjust the flame, turn the
knob to the zone between the maximum ( ) and the minimum (
)
settings. To turn out the burner, return the knob to the
position.
GAS OVEN THERMOSTAT KNOB
(CERTAIN MODELS ONLY)
This knob is used to ignite the gas burner inside the oven. The cooking
temperature is selected by turning the knob anticlockwise to the desired setting,
between Min. and 275°C.
For information on how to ignite the gas oven, see point “ 7.3 Use of the gas oven ”.
