Instruction for the installer
35
3.6
Adjustment of the oven burner (only for gas oven models)
To adjust the oven burners follow the procedure described below from
inside the oven:
•
Open the oven door;
•
Remove the oven dish and shelf.
•
Lift up the oven floor and remove.
3.6.1
Replacement of the oven burner nozzle
•
Loosen the fixing screws
A
on the oven burner.
•
Push the burner
B
towards the right to get to the
nozzle.
•
Use a 13 socket wrench to change the nozzle, fitting
the one for the type of gas to be used (see point
“3.2/3.3 Table of burner and nozzle characteristics”).
3.6.2
Regulation of the primary air on the oven burner
•
Loosen the register screws “
A
” on the air regulation coupling.
•
Turn the register coupling “
B
” to the position corresponding to the type of gas
to be used according to the table below.
•
Tighten the register screws and mount the seals.
•
Once the operation is completed reassemble the burner correctly.
NATURAL (N)
G30/G31 (LPG)
X =
5 mm
15 mm
