background image

INSTRUCTIONS FOR INSTALLATION & USE for the A RANGE

WF645,WF640,WF630 and WF620

Hotpoint recommends, for your own safety and to ensure you get the best possible results from your

Washing Machine, you read through this booklet and follow these steps thoroughly.

Choose a location for your washing

machine, where possible on a solid floor,

with the electrical sockets and water

supply taps easily accessible.

Allow sufficient space: 600mm width,

600m depth and 900mm height.

DO NOT install in a bath or shower room.

Dispose of packaging material in a safe
place and remove any labels.

Please read instructions thoroughly to
ensure you understand each stage
before you begin.

Read the rest of these instructions to get the best from your appliance, remember to fill in your guarantee registration.

Keep this Book in a safe place for quick reference.

STEP 1

STEP 2

A wash chart is provided to help you to
select your required programme.

Examples are given for the maximum 
washing load weights for different fabric
types.

STEP 4

WARNING: This appliance must be earthed.

Remember you may be charged for a service call if a
problem with your washing machine is caused by 
incorrect installation or misuse.

Electrical Guide

Installation Guide

Programme Selection

Read through this section to  familiarise

yourself with the different 

compartments within the dispenser

drawer.

STEP 3

Dispenser Drawer

NOTE: Always follow manufacturer’s dosage 

recommendations.

All available optional wash features are
explained within this section -  These
allow you to adjust your selected wash
programme to suit your needs.

STEP 6

Options Guide

How to start your selected programme

and how to stop or change the

programme if so required.

STEP 5

Using your Machine

NOTE: Progress indicator lights show what stage in

the programme cycle has been reached.

STEP 8

Troubleshooting

A picture guide provides a clear 

explanation how to set a wash 

programme.

DO NOT overload the washing machine.

STEP 7

A Typical Wash Programme

NOTE: Hotpoint recommend, on completion of

your programme, that you switch off both the 

electricity and water supply to the appliance.

Please refer to the Troubleshooting 
section if you have any problems when
using your washing machine.
There may be nothing wrong!

NOTE: In addition to the temperature of the 
incoming water, the selection of optional wash 
features will affect the programme times.

READ BEFORE

CONTACTING

SERVICE!

Содержание AQUARIUS+ WF620












Отзывы: