Using the SMC Wireless Utility (Mac)
65
SMCWUSB-N4 300 Mbps Wireless USB Adapter User Manual
Disconnect Button
Use this button to stop WPS action and disconnect the active link. You can then select
another profile from the
Profile
tab if one exists. If there are none, the Adapter selects any
non-security access point.
Export Button
Use this button to export the selected profile in the
WPS Profile List
to the
Profile
tab.
PIN Button
Use the
PIN
button at the bottom of the tab to start to add to the Registrar using the PIN
configuration method. Enter a PIN in the
Pin Code
field or read a PIN from your Enrollee
before clicking this button.
Note:
After you click the
PIN
button, wait two minutes before clicking
Rescan
to rescan
networks.
To cancel this setup within the interval, restart PIN/PBC or click
Disconnect
to stop the
WPS connection.
PBC
Use the
PBC
button to add access points using the PBC configuration method.
Note:
After you click the
PBC
button, wait two minutes before clicking
Rescan
to rescan
networks.
To cancel this setup within the interval, restart PIN/PBC or click
Disconnect
to stop the
WPS connection.
WPS associate IE Check Box
Check
WPS associate IE
to send an association request with WPS IE during WPS setup.
This is optional for STA.
WPS probe IE Check Box
Check the
WPS probe IE
check box to send a probe request with WPS IE during WPS
setup. This is optional for STA.