Using the SMC Wireless Utility (Mac)
64
SMCWUSB-N4 300 Mbps Wireless USB Adapter User Manual
WPS Profile List
The
WPS Profile List
shows the profile, SSID, authentication, and encryption settings of the
WPS-enabled devices.
Rescan Button
Click
Rescan
to rescan all networks.
WPS Profile List
The
WPS Profile List
shows all of the credentials obtained from the Registrar. The list
includes the profile, SSID, authentication, and encryption settings. Double-clicking a row or
clicking a row and then clicking the
Profile Detail
button displays a screen with additional
information about security and key credentials.
If STA Enrollee, credentials are created with each WPS success.
If STA Registrar, the utility creates a new credential with a WPA2-PSK/AES/64Hex-Key
and does not change until the STA Registrar changes.
Note:
Entries in the
WPS Profile List
are not displayed when the
Config Mode
drop-down
list is set to
Enrollee
.
Pin Code
The
Pin Code
field lets you enter an 8-digit PIN. It is required to enter a PIN code into the
Registrar when using the PIN method of WPS. Each network card has only one PIN code of
Enrollee. After entering a PIN in the
PIN Code
field, click the
Renew
button to renew the
PIN code.
Config Mode
Config Mode
lets you select whether the Adapter is acting as an Enrollee or an external
Registrar.
Connect Button
Use this button to connect to the selected network inside credentials. The active selected
credential is similar to the active selected profile.
Rotate Button
Use this button to connect to the next network inside credentials.
