Configuring Your Gateway
Using the Reboot Menu to Reboot the Gateway
One way to reboot the Gateway to the factory default settings is by using the Reset switch
on the Gateway’s rear panel. Another way is to use the Reboot menu.
Note:
Rebooting the Gateway keeps any customized overrides you made to the default
settings. To reboot the Gateway and return to the factory-default settings, use the Reset
switch on the rear panel of the Gateway (see page 13).
To access the Reboot menu, click
Tools
in the menu bar and then click the
Reboot
submenu in the menu bar. Figure 33 shows an example of the menu.
Figure 33. Reboot Menu
To reboot the Gateway:
1. In the Reboot menu, click
Apply
. The precautionary message in Figure 34 appears.
2. Click
OK
to reboot the Gateway or click
Cancel
to not reboot it. If you clicked
OK
, the
reboot is complete when the
POWER
LED stops blinking.
Figure 34. Precautionary Message
57
SMCD3G Cable Modem Gateway User Manual
Содержание SMCD3G
Страница 1: ......
Страница 49: ...Configuring Your Gateway Figure 27 Trigger Menu 49 SMCD3G Cable Modem Gateway User Manual...
Страница 59: ...Configuring Your Gateway Figure 35 Example of Status Page 59 SMCD3G Cable Modem Gateway User Manual...
Страница 68: ......