-37-
No.PF
※※
-OMS0002-B
■
[F 2] Setting of OUT2
Set the output mode of OUT2.
Refer to the list of switch output modes (page
) and the flow setting chart (page
).
: When using a model without OUT2 (switch output), this setting is not available and [---] will be displayed.
<Operation>: Setting of OUT2
Press the
or
button in function selection mode to display [F 2] on the main display.
[oUt2] and [the current set value (output mode)] are displayed in turn on the sub
display.
: If OUT2 is not available, [---] will be displayed.
Press the
button.
Output mode
[oU2] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the
or
button to select.
Press the
button to set.
Switch mode
[2ot] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the
or
button to select.
Press the
button to set.
When hysteresis mode is selected: Refer to page
When window comparator mode is selected: Refer to page
When accumulated output mode is selected: Refer to page
When accumulated pulse output mode is selected: Refer to page
