SMC Networks PFMC7102, Руководство по эксплуатации

Страница: 24 / 74

-23-
No.PF
※※
-OMS0002-B
Flow Setting (set value only) of OUT1 · OUT2 [3 step setting mode]
3 step setting mode
In this mode, only the set values can be input, in just 3 steps.
Use this mode if the product is to be used straight away, after changing only the set values.
■
Default settings
When the flow exceeds the set value [P_1], the switch will be turned ON.
When the flow falls below the set value by the amount of hysteresis [H_1] or more, the switch will turn OFF.
If the operation shown in the diagram below is acceptable, then keep these settings.
●
PFMC7501
Item Default settings
[P_1] Set value of OUT1 250 L/min
[H_1] Hysteresis of OUT1 25 L/min
[P_2] Set value of OUT2
 
250 L/min
[H_2] Hysteresis of OUT2
 
25 L/min
●
PFMC7102
Item Default settings
[P_1] Set value of OUT1 500 L/min
[H_1] Hysteresis of OUT1 50 L/min
[P_2] Set value of OUT2
 
500 L/min
[H_2] Hysteresis of OUT2
 
50 L/min
●
PFMC7202
Item Default settings
[P_1] Set value of OUT1 1000 L/min
[H_1] Hysteresis of OUT1 100 L/min
[P_2] Set value of OUT2


1000 L/min
[H_2] Hysteresis of OUT2
 
100 L/min

: Only available for models with switch outputs for both OUT1 and OUT2.

: For input of hysteresis, perform the settings referring to [F 1] Setting of OUT1 (page 29 to) and [F 2] Setting of OUT2 (page 37 to).