SMC Networks HRSH150-A*-20 Series Скачать руководство пользователя страница 157

Страница: 157 / 178

HRX-OM-Q026-B

Chapter 7 Control, Inspection and Cleaning

HRSH Series

7.2

Inspection and Cleaning

7-3

7.2.2 Monthly

check

Cleaning of air ventilation

Clean the dust-proof filter with a long bristled brush or by air purging to

prevent the fins from being deformed or damaged.

Cleaning of the dust-proof filter

The dust-proof filters are installed on the front and left side of the product.
There are totally four filters and all they have the same shapes.

They can be removed as shown in the drawing below.
Care should be taken not to deform or scratch the air-cooled condenser (fin) while the
removal.

Fig. 7-1 Removal of the dust-proof filter

If the air ventilation of the product have clogged with dust or
debris, heat radiation performance reduces. This results in the
reduction of cooling performance, and may stop the operation.

Содержание HRSH150-A*-20 Series



















































































































































































Результаты поиска

Содержание HRSH150-A*-20 Series

Отзывы:

SMC Networks HRSH150-A*-20 Series, Руководство по эксплуатации, Страница: 157 / 178

Результаты поиска

Содержание HRSH150-A*-20 Series

Отзывы: