SMC Networks HRSH090-A, Руководство по эксплуатации

Страница: 137 / 192

HRX-OM-R026
Chapter 5 Display and setting of various functions
HRSH Series 5.21 Communication function
5-75
30.
Select contact input signal 1 from the table below with [
▲] key or [▼] key, and confirm
by pressing “SEL”.
Table 5.21-16 List of set value
Set value Explanation
Initial value
(Default setting)
Without signal input
Start and stop signal input

External switch signal input(N.O. type)

4,

5
External switch signal input (N.C. type)

4,

5

4
：
When the setting of the communication mode is “DIO mode”, “External switch signal” cannot
be set.

5
：
When the setting of the communication mode is “SEIRAL mode” and the protocol setting is
“Simplified communication protocol 2”, “External switch signal” cannot be set.
Contact input signal 1 type Setting and checking
31.
Press the [SEL] key once.
The set screen of contact input signal 1 type is displayed on the digital display.
PV
SV
32.
Select contact input signal 1 type from the table below with [
▲] key or [▼] key, and
confirm by pressing “SEL”.
Table 5.21-17 List of set value
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available if the
setting of contact input signal 1 is OFF.
Alternate signal

Momentary signal

6

6
：
Used when the setting of the conta
ct input 1 is “Operation stop signal input”.
Contact input signal 1 delay timer of reading Setting and checking
33.
Press the [SEL] key once.
The set screen of the contact input signal 1 delay timer of reading is displayed on the
digital display.
PV
SV