SMC Networks HRS090-A...-20 Series, Оригинальное руководство пользователя

Страница: 49 / 192

HRX-OM- T002
Chapter 3 Transport and Setting Up
HRS090 Series 3.4 Piping
3-29

How to connect piping
Tighten the piping to each connection as follows below.
Fig. 3-18 Tightening of piping

How to connect to the drain port
When piping the drain port, hold the ball valve of the drain port with a wrench
not to rotate it.
Fig. 3-19 Connection to the drain
Hold the ball valve.
Without holding the ball valve of the drain port with a wrench, the ball
valve may rotate and it may cause a fluid leakage and/or malfunction
of the product. Be sure to hold the ball valve of the drain por
t.
Drain port
Note: Connect the strainer
so that the screen face
downward.
Note: Incase of using the Y
strainer of the accessory, fasten
it on the return port.
Clean the filer of the strainer
after the trial operation before
the proper operation
Sealant
Connection port
Arrow direction of Y strainer
Circulating fluid return port
Circulating fluid outlet port
Sealant