SMC Networks HRL Series, Руководство пользователя

Страница: 10 / 28

Circulating Fluid Temperature Controller
Thermo-chiller
Dual Channel Refrigerated Thermo-chiller for Lasers
HRL
Series
How to Order
Specifications
HRL A 20
Pipe thread type
Nil
Rc
F
G (with Rc-G conv ersion fitting)
N
NPT (with Rc-NPT conv ersion fitting)
Power supply
20
3-phase 200 VA C (50 Hz)
3-phase 200 to 230 VA C (60 Hz)
Cooling method
A
Air-cooled refr ige ration
Cooling capacity
CH1 CH2
100
9 kW 1 kW
200
19 kW 1 kW
300
26 kW 1 kW
Model
HRL100-A -20 HRL200-A -20 HRL300-A -20
CH1 CH2 CH1 CH2 CH1 CH2
Cooling method Air-cooled refrigeration
Refrigerant R410A (HFC)
Refrigerant charge [kg] 1.4 2.2 3.0
Control method PID control
Ambient temperature [
°
C] 2 to 45
Circulating fluid system
Circulating fluid CH1: Tap water/CH2: Tap water, Deionized water
∗ 1
Set temperature range [
°
C] CH1: 15 to 25/CH2: 20 to 40
Cooling capacity
∗
2 [kW] 9 1
∗ 8
19 1
∗ 8
26 1
∗ 8
Heating capacity
∗
3 [kW] 1.5 1 4.5 1 6.5 1
Temperature stability
∗
4 [
°
C] CH1:
±
0.1/CH2:
±
0.5
Pump
capacity
Rated flow (Outlet) [L/min] 45 (0.43 MPa ) 10 (0.45 MPa ) 45 (0.45 MPa ) 10 (0.45 MPa ) 125 (0.45 MPa ) 10 (0.45 MPa)
Maximum flow rate [L/min] 120 16 130 16 180 16
Maximum pump head [m] 50 49 55 49 68 49
Settable pressure range
∗
5 [MPa] 0.10 to 0.50 0.10 to 0.49 0.10 to 0.55 0.10 to 0.49 0.10 to 0.68 0.10 to 0.49
Minimum operating fl ow rate
∗
6 [L/min] 20 2 25 2 40 2
Tank capacity [L] 42 7 42 7 60 7
Bypass circuit (With valve) Installed
Electric conductivity setting range [
μ
S/cm] — 0.5 to 45.0 — 0.5 to 45.0 — 0.5 to 45.0
Particl e fi lter nominal filtratio n rating ( Accessory ) [
μ
m] 5
Circulating fluid outlet,
circulating fluid return port
CH1: Rc1 (Symbol F: G1, Symbol N: NPT1)
CH2: Rc1/2 (Symbol F: G1/2, Symbol N: NPT1/2)
Tank drain port CH1: Rc3/4 (Symbol F: G3/4, Symbol N: NPT3/4) CH2: Rc1/2 (Symbol F: G1/2, Symbol N: NPT1/2)
Fluid contact material
(Metal/Resin)
CH1: Stainless steel, Copper (Heat exchanger brazing), Brass, Bronze, Fluororesin, PP, PBT, POM, PU, PC, PVC, EPDM, NBR
CH2: Stainless steel, Alumina ceramic, Carbon, Fluororesin, PP, PBT, POM, PU, PVC, PPS, AS, PS, EPDM, NBR, Ion replacement resi n
Electrical system
Power supply
3-phase 200 VAC (50 Hz), 3-phase 200 to 230 VAC (60 Hz)
Allowable voltage range
±
10% (No continuous voltage fluctuation)
Earth leakage
breaker
Rated current [A] 30 40 50
Sensitivity current [mA] 30
Rated operating current
∗
4 [A] 17 32 41
Rated power consumption
∗
4 [kW(kVA)] 5.4 (5.9) 10.5 (11.0) 13.1 (14.2)
Noise level (Front 1 m/Height 1 m)
∗
4 [dB(A)] 75 75 71
Accessories
Operation Manual (for installation/operation) 2 pcs. (English 1 pc./Japanese 1 pc.), Particle filter set for CH1,
Particle filter set for CH2, Anchor bolt fixing brackets 2 pcs. (including 6 M8 bolts) ∗ 7
Weight (dry state) [kg] Approx. 222 Approx. 251 Approx. 315
∗
1 Use fluid in condition bel o w as the circulating fluid.
Tap water: Standard of The J apan Refr ige r ation And Air Conditioning Indust r y Association (JRA GL-02-1994)
Deionized water: Elect r ic conductivity 1
μ
S/cm or higher (Elect ric resistivity 1 M
Ω
·cm or low er)
∗
2

Ambient temper ature: 32
°
C,

Circulating fluid : Tap water,

Circulating fluid temper ature : CH1 20
°
C/CH2 25
°
C,

Circulating fluid fl ow rate: Rated
fl ow,

Pow er supply : 200 VAC
∗
3

Ambient temper ature : 32
°
C,

Circulating fluid : Tap water,

Circulating fluid fl ow rate: Rated fl ow,

Pow er supply : 200 VAC
∗
4

Ambient temper ature: 32
°
C,

Circulating fluid : Tap water,

Circulating fluid temper ature : CH1 20
°
C/CH2 25
°
C,

Load : Same as the cooling ca-
pacity,

Circulating fluid fl ow rate: Rated fl ow,

Pow er supply : 200 VAC,

Piping length : Shortest
∗
5 With the pressure control mode by inverter. If the pressure control mode is not necessa ry , use the fl o w control function or the pump output setting function.
∗
6 Fluid fl ow r ate to maintain the cooling capacit y. If the actual fl ow rate is lower than this , adjust the bypass valve.
∗
7 The anchor bolt fixing b rack ets (including 6 M8 bolts) are used f or fixing to wooden skids when pac kaging the the rmo-chiller. No anchor bolt is included.
∗
8 Max. 1.5 kW. When 1.5 kW is applied, the cooling capacity of CH1 decreases by 0.5 kW.
100
9