SMC Networks 8124PL2, Руководство по управлению

Страница: 241 / 491

Command Line Interface
4-8
4
Command Groups
The system commands can be broken down into the functional groups shown below
.
Ctrl-N Enters the next command line in the history buffer.
Ctrl-P Enters the last command.
Ctrl-R Repeats current command line on a new line.
Ctrl-U Deletes from the cursor to the beginning of the line.
Ctrl-W Deletes the last word typed.
Esc-B Moves the cursor back one word.
Esc-D Deletes from the cursor to the end of the word.
Esc-F Moves the cursor forward one word.
Delete key or backspace key Erases a mistake when entering a command.
Table 4-4. Command Group Index
Command Group Description Page
Line Sets communication parameters for the serial port and Telnet,
including baud rate and console time-out
4-9
General Basic commands for entering privileged access mode, restarting
the system, or quitting the CLI
4-19
System Management Controls system logs, system passwords, user name, browser
management options, and a variety of other system information
4-23
Flash/File Manages code image or switch configuration files 4-64
Authentication Configures logon access using local or remote authentication;
also configures port security and IEEE 802.1X port access control
4-70
Access Control List Provides filtering for IP frames (based on address, protocol, TCP/
UDP port number or TCP control code) or non-IP frames (based on
MAC address or Ethernet type)
4-88
SNMP Activates authentication failure traps; configures community
access strings, and trap managers; also configures IP address
filtering
4-96
Interface Configures the connection parameters for all Ethernet ports,
aggregated links, and VLANs
4-111
Broadcast Configures broadcast storm control 4-121
Mirror Port Mirrors data to another port for analysis without affecting the data
passing through or the performance of the monitored port
4-122
Rate Limiting Controls the maximum rate for traffic transmitted or received on a
port
4-124
Link Aggregation Statically groups multiple ports into a single logical trunk;
configures Link Aggregation Control Protocol for port trunks
4-125
Address Table Configures the address table for filtering specified addresses,
displays current entries, clears the table, or sets the aging time
4-135
Table 4-3. Keystroke Commands
(Continued)
Keystroke Function