SMC Networks 8124PL2, Руководство по управлению

Страница: 252 / 491

General Commands
4-19
4
General Commands
enable
This command activates Privileged Exec mode. In privileged mode, additional
commands are available, and certain commands display additional information.
(See “Understanding Command Modes” on page 4-5.)
Syntax
enable [ level ]
level - Privilege level to log into the device.
The device has two predefined privilege levels: 0: Normal Exec,
15: Privileged Exec. Enter level 15 to access Privileged Exec mode.
Default Setting
Level 15
Command Mode
Normal Exec
Command Usage
• “super” is the default password required to change the command mode from
Normal Exec to Privileged Exec. (To set this password, see the enable
password command on page 4-26.)
• The “#” character is appended to the end of the prompt to indicate that the
system is in privileged access mode.
Table 4-6. General Commands
Command Function Mode Page
enable Activates privileged mode NE 4-19
disable Returns to normal mode from privileged mode PE 4-20
configure Activates global configuration mode PE 4-20
show history Shows the command history buffer NE, PE 4-21
reload Restarts the system PE 4-21
end Returns to Privileged Exec mode any
config.
mode
4-22
exit Returns to the previous configuration mode, or exits the
CLI
any 4-22
quit Exits a CLI session NE, PE 4-23
help Shows how to use help any NA
? Shows options for command completion (context
sensitive)
any NA