SMC Networks 8124PL2, Руководство по управлению

Страница: 193 / 491

Configuring the Switch
3-148
Command Attributes
• Interface – Select port or trunk identifier.
• Priority – CoS value. (Range: 0-7, where 7 is the highest priority)
• Traffic Class * – Output queue buffer. (Range: 0-3, where 3 is the highest CoS
priority queue)
* CLI shows Queue ID.
Web – Click Priority, Traffic Classes. Assign priorities to the traffic classes (i.e.,
output queues), then click Apply.
Figure 3-91. Configuring Class of Service
CLI – The following example shows how to change the CoS assignments to a
one-to-one mapping.
6 Voice, less than 10 milliseconds latency and jitter
7 Network Control
Console(config)#interface ethernet 1/1 4-111
Console(config-if)#queue cos-map 0 0 4-172
Console(config-if)#queue cos-map 1 1
Console(config-if)#queue cos-map 2 2
Console(config-if)#exit
Console(config)#exit
Console#show queue cos-map ethernet 1/1
4-174
Information of Eth 1/1
CoS Value : 0 1 2 3 4 5 6 7
Priority Queue: 0 1 2 1 2 2 3 3
.
.
.
Table 3-13 CoS Priority Levels
Priority Level Traffic Type