61
3.4.3.2
Services
In the
ACCESS CONTROLS
page, click
Services
. The page as shown in the following figure appears:
In this page, you can enable or disable the services that are used by the remote host. For example, if telnet service is
enabled at port 23, the remote host can access the device by telnet through port 23.
Select the management services that you want to enable or disable at the LAN or WAN interface and click
Apply
to
apply the settings.
Caution:
If you disable the HTTP service, you cannot access the configuration page of the device any more.
3.4.3.3
IP Address
In the
ACCESS CONTROLS
page, click
IP Address
. The page as shown in the following figure appears:
In this page, you can configure the IP address in the access control list (ACL). If ACL is enabled, only devices of
the specified IP addresses can access the device.
Select
Enable Access Control Mode
to
enable ACL.
Note:
