24
Parameters in this page are similar to those in the page for
Auto (WPA or WPA2)
.
Click
Apply
to save the settings.
3.2.3
Local Network
You can configure the LAN IP address according to the actual application. The preset IP address is 192.168.1.1.
You can use the default settings and DHCP service to manage the IP settings of the private network. The IP address
of the device is the base address used for DHCP. To use the device for DHCP in your LAN, the IP address pool
used for DHCP must be compatible with the IP address of the device. The IP address available in the DHCP IP
address pool changes automatically if the IP address of the device changes.
You can also enable the secondary LAN IP address. The primary and the secondary LAN IP addresses must be in
different network segments.
Choose
Setup
>
Local Network
. The
LOCAL NETWORK
page as shown in the following figure appears:
By default,
Enable DHCP Server
is selected for the LAN interface of the device. DHCP service provides IP
settings to workstations configured to automatically obtain IP settings that are connected to the device through the
Ethernet port. When the device is used for DHCP, it becomes the default gateway for DHCP client connected to it.
