16
Field
Description
Encapsulation Mode
Select
LLC
or
VCMUX
from the drop-down list. Usually, you can select
LLC
.
802.1Q VLAN ID
If you enter a value, packets from the interface is tagged with the set 802.1q VLAN ID. Its
value range is 0-4094, while
0
indicates to disable this function.
NETWORK ADDRESS TRANSLATION SETTINGS
Enable Bridge Service
Select or deselect the check box to enable or disable the WAN connection.
Service Category
The name to identify the WAN connection. You need not modify it.
PPPoE/PPPoA
If you select the PPPoE or PPPoA as the connection protocol, the following page appears.
PPP Username:
The correct user name that your ISP provides to you.
PPP Password:
The correct password that your ISP provides to you.
Authentication Method:
You can select it from the drop-down list. The default value is AUTO.
Use Static IP Address:
If this function is disabled, the modem obtains an IP address assigned by an uplink
equipment such as BAS, through PPPoE dial-up.If this function is enabled, the modem uses this IP address as the
WAN IP address.
MER
If you select the MER as the connection protocol, the following page appears.
