18
3.2.2
Wireless Setup
This section describes the wireless LAN and some basic configuration. Wireless LANs can be as simple as two
computers with wireless LAN cards communicating in a pear-to-pear network or as complex as a number of
computers with wireless LAN cards communicating through access points that bridge network traffic to a wired
LAN.
Choose
Setup
>
Wireless
. The
WIRELESS SETTINGS
page as shown in the following figure appears:
3.2.2.1
Wireless Basics
In the
WIRELESS SETTINGS
page, click
Wireless Basic
.
The page as shown in the following figure appears:
In this page, you can configure the parameters of wireless LAN clients that may connect to the device.
The following table describes the parameters in this page.
Field
Description
Enable Wireless
Select or deselect the check box to enable or disable the wireless function.
Enable MultiAP Isolation
Select or deselect the check box to enable or disable multiAP isolation. If this function is
enabled, clients of different SSIDs cannot access each other.
Wireless Network Name (SSID)
Network name. It can contain up to 32 characters. It can consist of letters, numerals,
and/or underlines.
Visibility Status
Visible
indicates that the device broadcasts the SSID.
Invisible
indicates that the device does not broadcast the SSID.
Country
Select the country where you are in from the drop-down list.
