49
In this page, you can enable universal plug and play (UPnP) and then the system serves as a daemon.
UPnP is widely applied in audio and video software. It automatically searches devices in the network. If you are
concerned about UPnP security, you can disable it. Select the WAN and LAN interfaces at which you want to
enable UPnP and click
Apply
to save the settings.
3.3.10.5
ADSL Settings
In the
NETWORK TOOLS
page, click
ADSL
. The page as shown in the following figure appears:
In this page, you can select the ADSL modulation. Normally, you are recommended to keep the factory defaults.
The device negotiates the modulation mode with the DSLAM.
Click
Apply
to save the settings.
3.3.10.6
SNMP
In the
NETWORK TOOLS
page, click
SNMP
. The page as shown in the following figure appears:
In this page, you can set the SNMP parameters. The following table describes the parameters in this page.
