39
3.3.5.3
Bridge Filtering
In the
FILTERING OPTIONS
page, click
Bridge Filtering
. The page as shown in the following figure appears:
This page is used to configure bridge parameters. In this page, you can modify the settings or view the information
of the bridge and its attached ports.
Click
Add
to add a bridge filter. The page as shown in the following figure appears:
The following table describes the parameters in this page.
Field
Description
Protocol Type
Select the protocol type to be mapped from the drop-down list. You can select
PPPoE
,
IPv4
,
IPv6
,
AppleTalk
,
IPX
,
NetBEUI
, or
IGMP
.
Destination MAC Address
Enter the destination MAC address to be mapped.
Source MAC Address
Enter the source MAC address to be mapped.
Frame Direction
Select the frame direction to be mapped from the drop-down list. The device supports
frame direction from LAN to WAN and that from WAN to LAN.
Time schedule
Select the time that you want to apply the rule from the drop-down list. You can select
always
or
never
.
Wan interface
Select the WAN interface to be mapped from the drop-down list.
Click
Apply
to save the settings.
