SMAY iSWAY-FC, Руководство по эксплуатации и обслуживанию

Страница: 30 / 168

Operation and Maintenance Manual (DTR) iSWAY
®
Set of products
Version 1.8 of 2.2021 30
Standing in the direction of air flow in the supply air unit
the operation side is on the right-hand
Standing in the direction of air flow in the supply air unit
the operation side is on the left
8.2. Product labelling rules
8.2.1. iSWAY-FC
®
labelling
iSWAY- FC-<A>-<V>-<Q>-<DR>-<X>-<T>-<U>-<Y>-<ML>-<Dc>-<K>/<ADD>
<A>- automatics*
none = Local FireBUS
®
is not connected
D - for Local FireBUS
®
loop operation
R - for the reversible system
<V> - fan capacity at 300Pa available compression
0.3 - max. capacity 14500 m
3
/h (depending on the variant)
0.12 – max. capacity 20000 m
3
/h (depending on the variant)
1.17 – max. capacity 27200 m
3
/h (depending on the variant)
1.20 – max. capacity 35600 m
3
/h (depending on the variant)
1.24 – max. capacity 42000 m
3
/h (depending on the variant)
2.31 – max. capacity 56500 m
3
/h (depending on the variant)
2.39 – max. capacity 61500 m
3
/h (depending on the variant)
2.47 – max. capacity 65000 m
3
/h (depending on the variant)
2.75 – max. capacity 78200 m
3
/h (only variant with increased capacity <Q>=J)
<Q> - variant of the unit
none - standard
J
– increased capacity
<DR>- operation direction*
none = on the air supply
E - on the exhaust
<X> - operation side*
None = right operation side
L - left-hand side
<T> - operating temperature (manufacturer's recommendation)*
none = from -
5 to +55 °C
AF - from - 25 to +55 °C - fitted with Anti-Frost system
<U> - location of the device*
none = inside the building
Z
– outside the building
<Y> - additional 24VDC outputs*
none = no additional 24VDC outputs
M - has an output for KSN vent, 24VDC power output for TSS, 24VDC output for peripheral device
<ML>- measuring strip module*
none = no measuring strip
LP
– measuring strip
<Dc>- additional pressure sensor*
none = no additional pressure sensor
PF – PMAC-F pressure sensor (there is one pressure sensor in standard, in case of choosing
measuring strip it is use for air flow measuring)
<K> - automatic canopy for vertical installation (only <V>=0.3 and 0.12 version)*
none = without automatic canopy