To set the RPM limiter to Stock, select a value below 3500 or simply 0.
Shift limiter
The Shift limiter can be programmed 'Stock' or 'Off'
Shift limiter programmed "Off" allows the engine to produce full power also during gear shifts or
power braking. DO NOT USE IT WITH A STOCK TRANSMISSION.
Torque
The Torque selection can be programmed 0 (stock), 1 (mild), 2 (moderate) or 3 (wild).
IMPORTANT: with torque level 2 or above, an aftermarket clutch/AT Transmission is recommended.
Low-load - Injection Timing
The Timing selection for low-load driving condition can be programmed Stock or with a value
between 1 and 50. To select the stock timing, press 0.
High-load - Injection Timing
The Timing selection for hig-load driving condition can be programmed Stock or with a value
between 1 and 50. To select the stock timing, press 0.
Low-load - Rail Pressure
The Rail Pressure selection for low-load driving condition can be programmed Stock or with a value
between 1 and 50. To select the stock rail-pressure, press 0.
High-load - Rail Pressure
The Rail Pressure selection for high-load driving condition can be programmed Stock or with a value
between 1 and 50. To select the stock rail-pressure, press 0.
Low-load - Injection Duration
The injection duration for low-load driving condition can be programmed Stock or with a value
between 1 and 50. To select the stock injection duration, press 0.
High-load - Injection Duration
The injection duration for high-load driving condition can be programmed Stock or with a value
between 1 and 50. To select the stock injection duration, press 0.
Page 7 of 16
