background image

-28-

Even in such conditions bicycle riding can be naturally dangerous as 
bodily injury or death can take place, especially if the rider does not 
ensure that the safety and maintenance checks recommended in this 
manual are followed, if the rider does not wear a helmet, if he fails to 
follow the rules of the road, if he goes into traffic, rides double, or gets 
involved in aggressive stunts or extreme terrain riding. All riders will 
presume their own risk of injury while biking, and smarTrike will not 
take any responsibility unless the accident and injury arise out of 
smarTrike’s sole negligence and such negligence has to be definitely 
proven.

THE PURCHASE OF THIS smarTrike  BICYCLE WILL CONFIRM THE 
BUYER’S AGREEMENT THAT smarTrike  LIABILITY UNDER THIS 
WARRANTY SHALL BE NO GREATER THAN THE AMOUNT OF THE 
ORIGINAL PURCHASE PRICE AND IN NO EVENT SHALL smarTrike
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

This Limited Warranty will be void in case the product is ever:
Used in a manner other than for recreation or transportation purpose
Altered or modified in any way.
Used for rental purposes.

smarTrike does not provide an extended warranty; in case you have 
bought an extended warranty, it has to be honored by the store from 
which you bought the bicycle or the appropriate party. For your personal 
records, retain your original sales receipt with this manual.

 continued

R

R

Содержание Xtend Mg+

































Отзывы: