SmartTrike Xtend Mg+, Руководство пользователя

Страница: 23 / 32

Regularly check the tyre inflation pressure as all tyre lose air gradually with the passage of
time. For extended storage, keep the weight off the tyres of the bicycle.
Be careful not to use unregulated air hoses to inflate the tyre/tubes of the bicycle. An unregulat-
ed hose could abruptly over-inflate the tyres and cause them to burst.
Replace the tyres that are worn out.
WARNING: In case a tyre is under-inflated do not sit on the product as it can damage the tyre,
rim and inner tube.
-23-
Maintenance and Service - Tyre
Inflating the Tyre:
To inflate the tyres of the bicycle, use a hand or a foot pump.
Service station meter-regulated air hoses can also be used.
The tyre sidewall showcases the maximum inflation pressure.
Prior to adding air to any tyre of the bicycle, ensure that the edge of the tyre (the bead) is the
same distance from the rim, all around the rim, and on both sides of the tyre. In case the tyre
does not seem to be seated properly, release air from the inner tube until you can push the
tyre’s bead into the rim where needed. Add air gradually and stop regularly for checking the tyre
seating as well as the pressure, until you reach the proper inflation pressure.
WARNING:
The product must be frequently inspected. A failure to inspect the product and to make repairs
or necessary adjustments can lead to injury to the rider or to others. Ensure that all the parts
are properly assembled and adjusted as per the written instructions in this manual and any
“Special Instructions”.
Instantly replace any damaged, missing, or badly worn parts with the original equipment.
Ensure that all fasteners are securely tightened as written in this manual and any “Special
Instructions”. In case parts are not tightly secured they could be lost or the operation could be
adversely affected. Be careful not to over tighten some parts as they could be damaged. Ensure
that the replacement fasteners are of the correct type and size.
NOTE: In case you do not have the proper tools or are unsure of the instructions or any
“Special Instructions” provided in this manual, have a bicycle service shop make any
repairs or adjustments to the bicycle
Repair and Service
Maintenance: