SmartTrike Xtend Mg+, Руководство пользователя

Страница: 17 / 32

-17-
2
D. Replace the screw and
secure it for locking purpose.
WARNINGS:
The chain must stay on the sprockets. In case it
comes off the sprockets, It will not be possible to
pedal.
WARNINGS:
Do not try to repair chain on your own. If any
problem arises with the chain, go to a bicycle
service shop to get the repair work done.
Chain Adjustment
Adjustment:
The chain needs to be at the right tightness. If it is too tight, it will be difficult for the rider to pedal the
bicycle. If it is too loose, the chain can come off the sprockets.
When the chain C is at the correct tightness, the rider can rotate the crank freely and pull it no more
than one-half inch A away from a straightedge B as shown in the image. You need to adjust the
tightness of the chain by following these guidelines:
The axle nuts of the rear wheel must be loosened.
Shift the rear wheel forwards or backwards as required.
A
B
C
NOTE: Ensure the rear wheel is in the
centre of the bicycle frame.
Maintain the wheel in this position and
tighten securely.
6mm
D