SmartLine RotaScope Classic Series, Инструкция по установке и эксплуатации

Страница: 72 / 100

RotaScope Classic Cabinet
Manual Version 1.04 Date 23 November 2021 72
4.1.2 Lifting, handing and transporting the product
Prior to each installation, it is very important to confirm access to the location of the
cabinets. Mapping the complete route to be sure that a cabinet can be moved
through the department / hospital without obstacles / impediments is necessary, to
ensure the installation can be completed within the allocated timeframe.
As the RotaScope Cabinet is of significant size, access on site can be of concern on
occasion. Lifts being used for access must be at least
2500mm in any one direction,
and if not, it will have to be confirmed that the stairwell is an acceptable alternative
route.
To lift, handle or transport the product safely:
Only attempt to lift it after receiving appropriate education from an Authorised
Distributor
Always use lifting and mobility assistance devices
Never attempt to lift or move a cabinet without assistance (two persons minimum)
Storing the product
RotaScope cabinets should be installed and stored in continuous operating
environment ie. Standard office working conditions need to be always provided.
Room temperature range 10 C° to 30 C°, relative humidity between 40% and 70%.
To store the product safely:
Keep cabinet in crate until being transferred into desired installed position
If the cabinet needs to be removed from crate prior to install, maintain the
protective packaging until install and store in a clean and dry location
Once installed, follow the standard cleaning regime
4.1.3 Storing the product during intervals in normal use
Once installed the cabinet should remain running when not in use and weekly
cleaning regime should be maintained. If decommissioned or relocated, the cabinet
must be handled and stored appropriately as per this manual and must be reinstalled
an undergo a full or partial IQ, OQ and PQ. (Installation Qualification as described in
EN16442:2015 Standards)
To store the product during intervals in normal use:
Cover the cabinet in a suitable temporary protective material.
Uncover at time of re-commissioning.
Complete IQ, OQ and PQ