HGM6000K Series Automatic Generator Module
HGM6000K Series Automatic Generator Module ISSUE 2011-06-20 Version 1.7 Page 29 of 34
9 SENSOR SETTINGS
1
．
When the choice sensor, the sensor to standard curve will call. If factory set
temperature sensor for SGX (resistance-type), sensor curve for SGX
(resistance-type), 120 degrees Celsius (elected SGD type), resistively curve
for temperature sensor SGD curve.
2
．
If use standard sensor with the curve, can differ option "item sensor curve
input", after adjusting adjustment can be determined according to save.
3
．
When the input sensor curve, X (resistance) must be in accordance with the
order of big from small, otherwise will enter errors.
4
．
When the sensor is choosing "nothing", the sensor curves no affection, LCD
display temperature or pressure for---.
5
．
If there is no pressure sensor, only low pressure alarm switch, it must be
alarm settings for pressure sensor "nothing", otherwise may appear oil
pressure low alarm shutdown.
6
．
Can set up several point of forehand or several point of backmost ordinate the
same. The following picture:
Common
unit’s conversion table
1N/m
2
(pa)
1kgf/cm
2
1bar
(1b/in
2
) psi
1Pa
1
1.02x10
－
5
1×10
-5
1.45×10
-4
1kgf/cm
2
9.8×10
4
1
0.98
14.2
1bar
1×10
5
1.02
1
14.5
1psi
6.89x10
3
7.03×10
-2
6.89×10
-2
1
