HAT828 High Speed ATS Controller User Manual Page 8 of 56
3
SPECIFICATION
Table 2 – Performance Parameters
Items
Contents
Working Voltage
1.
DC8.0V~35.0V, continuous power supply, DC reverse connection
protection;
2.
AC(90~576)V power supply.
Overall Consumption
<6W (Standby mode: ≤3W)
AC Voltage Input (PT or PT
secondary side not used)
AC system
3P4W (L-L)
(80~625)V
3P3W (L-L)
(80~625)V
1P2W (L-N)
(50~360)V
2P3W (A-B)
(80~625)V
Voltage Resolution: 1V
Accuracy: 1%
AC Frequency
Rated: 50/60Hz
Range: 15Hz~75Hz
Resolution: 0.01Hz
Accuracy: 0.1Hz
S1 Close Output Port
S2 Close Output Port
16A AC250V Volts free relay contacts output
Aux. Output Port 1~4
16A AC250V Volts free output
Aux. Output Port 5~8
10A
AC250V Volts free output
Aux. Output Port 9~10
8A
AC250V Volts free output
Digital S1, S2 Close Input
GND(B-) connected is active, low on threshold voltage is DC 1.2V, max.
input voltage is DC 60V.
Digital Input 1~8
RS485 Interface
Isolated, half-duplex, 2400/4800/9600/19200bps baud rate can be set,
Modbus-RTU communication protocol.
USB Interface
D-type USB interface
EMC Test Standard
Meet GB/T14048.11-2016 and IEC/EN 60947-6-1
Vibration
5Hz~8Hz: x=±7.5mm
8Hz~500Hz: a=±2g
IEC 60068-2-6
Shock
50g, 11ms, half-sine, three consecutive shocks are applied in each of the
three mutually perpendicular directions, i.e. a total of 18 times.
IEC 60068-2-27
Bump
25g, 16ms, half-sine
IEC 60255-21-2
Case Dimensions
260mmx180mmx54mm
