HAT553V ATS Controller User Manual Page 13 of 32
Table 15 Other Status Information
No.
Item
Description
1
Start Inhibit
Genset start inhibit input is active.
2
Remote Gen On Load Remote start on-load input is active.
3
Remote Gen Off Load Remote start offload input is active.
4
Gen Start Mains NG
Start when Mains is abnormal.
5
Auto Mode
Current is in auto mode.
6
Manual Mode
Current is in manual mode.
6.4
MAIN MENU
In main interface, press
key to enter main menu screen.
1. Exit
2. Parameters Set
3. History Record
4. Auto Trans./Restore
5. Test Genset
6. Date & Time Set
7. Language
8. Total Information
9. Information
Press Down key and select different parameter line (backlit)
and then press Confirm key, to enter related interface.
NOTE
: Password is needed for entering parameter settings, and default password is "01234"; Operators can change the
password to prevent others changing controller configurations randomly. Please remember clearly after the change, or it
is forgotten, please contact our company personnel.
7
GENSET START/STOP OPERATIONS
7.1
MANUAL START/STOP
7.1.1
PANEL START/STOP
In main screen, press Set/Confirm key to enter main menu interface; select "5. Test Genset" to enter
manual start operation screen.
When system type is "A Mains B Gen, A Gen B Mains, A Mains B Mains", the below operation interface is
directly entered.
Test Genset
Press Down key to select different parameter line (backlit) and press
Confirm key to confirm.
Return
Genset Stop
Genset Start
Genset Stop
: Disconnect the outputted genset start signal, which is to control genset stop;
Genset Start
: Control genset start signal output, which is to control genset start;
