50
SMARTEK Vision | User Manual
– LED Strobe Controller Family | Doc. v2.2.1
Figure 39: ScLibClient - Light head Information
Controller
–
these parameters are changed when changing IP address of the strobe controller.
These parameters are also read out in the controller status field:
•
Connection
–
IP address of the strobe controller
•
Model
–
model of the strobe controller
•
User Name
–
name that's given when changing IP address of the strobe controller
or a default name
•
Unique ID
–
unique ID of the light head
Light head Signature Data
–
these parameters are changed when writing new digital signature.
These parameters are also read out in the
Light heads
tab:
•
Vendor
–
vendor of the light head
•
Model
–
model of the light head
•
Serial Number
–
serial number of the light head
7.9.1.1. Circuit
A new circuit is added by selecting the Append New Circuit (1) button. Parameters for circuits
are defined under Circuit tab. To save current parameters click Save File (2) button. To update
signature in EEPROM with current parameters click on Write EEPROM (3) button. To see
current parameters in raw hex format, go to Raw EEPROM Signature Data (4) tab.
