20
SMARTEK Vision | User Manual
– LED Strobe Controller Family | Doc. v2.2.1
3.3. IPSC4
Figure 14: IPSC4
– Front panel view
Specification
IPSC4
Output channels
4
Asynchronous Operation
No timing independent channels
Operating Modes
Continuous, External Trigger, Internal Trigger,
Software Trigger, External Switch
Max. Voltage
200V (pulsed)
55V (continuous)
Max. current pulse
(depending on pulse width)
10A @ 200V per channel (40A total)
Max. continuous current
1A @ 30V per channel (4A total)
Pulse output range
1µs
– 1000ms in 1µs steps
Maximum frequency
(External Trigger)
4,9kHz
Maximum frequency
(Internal Trigger Generator,
External Switch Mode)
997Hz
Trigger input
0
– 5V or 0 – 24V level,
positive or negative edge (not opto-isolated)
Control interface
Ethernet (10BaseT), RS232
Power requirements
12V
– 24V DC (min 11V, max 26V)
Power consumption
Max 5A @ 24V (120W)
Max 5,5A @ 24V (132W)
with additional heat sink
Housing:
Black aluminum case
External dimensions
(H / W / L)
55 x 130 x 124 mm
Weight
approx. 680g
Storage temperature (ambient)
from -30°C/-22°F up to +80°C/+176°F
Operating temperature (ambient)
from -5°C/+23°F up to +50°C/+122°F
Conformity
CE, RoHS2
Table 13: IPSC4 - Specification
