51
SMARTEK Vision | User Manual
– LED Strobe Controller Family | Doc. v2.2.1
Figure 40: ScLibClient - Adding New Circuit
Single Circuit Definition
defines parameter for single circuit:
•
Circuit Description
–
defines the name of circuit.
•
User Data
–
circuit user data.
•
LED Serial Count
–
number of LEDs connected in series.
•
LED Parallel Count
–
number of LEDs connected in parallel.
•
Joined Channels Count
–
number of connected channels in custom illumination.
Single LED Data Definition
section defines parameters for the single LED:
•
LED Type ID
–
user configurable, with a value between 0
– 65535
•
LED Wavelength
–
wavelength of the LED determines the color of the LED, with a value
between 0
– 255 [x10nm]
•
Forward Voltage (Uf)
–
maximum forwarded voltage on a LED, with a value between 0.00
–
600.00[V]. This value should be read out from the specifications of the LED
•
Dynamic Resistance (Rf)
–
LEDs electrical resistance when it is in operation, with a value
between 0.00
– 600.00[Ohm]. This value should be read out from the specifications of the
LED
•
Max DC Current (Built in light head)
–
maximal allowable current trough LED when built in
light head with a value between 1
– 65535 [mA]
•
Max Pulsed Current
–
maximal allowable current trough LED when the device is in pulse
mode, with a value between 1
– 65535 [mA]
1
4
3
2
