48
SMARTEK Vision | User Manual
– LED Strobe Controller Family | Doc. v2.2.1
•
Trigger 1, 2, 3, 4 (flag)
– enable or disable trigger.
The
Trigger Input(s)
parameters are not used if the controller is in
Continuous
,
External Switch
or
Off
mode. The HPSC1 v2, HPSC2 and HPSC4 series provide different trigger Delay/On
times for LED and OUT used for manual synchronization of camera and light source.
Figure 36 below shows how the timing of each trigger input line is transferred to the
corresponding output(s).
Figure 36: Process of generating pulses
