SMART SmartBoard 600 Series, Руководство пользователя

Страница: 16 / 56

8 Before Installing Your 600i2 Interactive Whiteboard System 99-00850-21 A0
Dust and Scratching
SMART Board 600i2 interactive whiteboard systems are for use in office and classroom environments and are
not for industrial use, where heavy dust and pollutants can cause malfunctions or impaired operation
. The
design is for pollution degree 1 (P1) as per EN61558-1, which is defined as “No pollution or only dry
non-conductive pollution.”
Electrostatic Discharge (ESD)
SMART Board 600i2 interactive whiteboard systems meet the requirements of EN61000-4-2 severity level 4 for
direct and indirect ESD. No malfunction or damage up to 8kV (both polarities) with a 330 ohm, 150 pF probe (air
discharge). Unmated connectors meet 4kV (both polarities) for direct (contact) discharge.
Conducted and Radiated Emissions
The narrowband radiated electric field from SMART Board 600i2 interactive whiteboard systems meets the limits
for Class A performance as defined in EN55022/CISPR 22.
IMPORTANT
Before Installing Your SMART Board 600i2 Interactive Whiteboard System
Choose a location for your SMART Board 600i2 interactive whiteboard system that’s far from a bright light
source, such as windows or overhead lighting. Bright light sources can cause distracting shadows on the
interactive whiteboard and reduce the contrast of the projected image.
Locate a wall with a flat, regular surface and minimum clearance to accommodate your interactive whiteboard
system. Make sure that the Unifi 45 projector and the SMART Board interactive whiteboard are both installed on
a flat surface relative to each other. For best presentation alignment, SMART recommends that you mount your
interactive whiteboard system in a location that is central to your audience’s viewing direction. For mobile
installation or adjustable installation options, contact your
authorized SMART reseller . If the mounting surface is
slightly irregular or the interactive whiteboard system cannot be directly mounted on a stud, consult document
119764 on the SMART Technologies support site.
Recommended Heights for Mounting
SMART includes a mounting template with each of its 600i2 interactive whiteboard systems.If you lose this
template, contact your
authorized SMART reseller . Using this template ensures that you:
– mount the Unifi 45 projector at a safe height for head-space clearance, while maintaining enough
space for airflow and installation access above the unit
– position the projector at the correct height above the 600 series interactive whiteboard to make sure
that the projected image aligns with the touch screen.
Dimensions on the template recommend a distance from the floor that is suitable for adults of average height.
Although you should consider the general height of your user community when you choose a position for the
interactive whiteboard, consult your local regulations before mounting the unit.
WARNING
Using the Unifi 45 projector system near a TV or radio may cause interference to the images or
audio sound. If this happens, move the TV or radio away from the projector.
When mounting the projector on a framed wall, you must attach both the mounting bracket and
safety tether to a stud to safely support the projector’s weight. If you only use drywall anchors,
the drywall can fail, resulting in product damage and possible personal injury.