PAGE 1 OF 6
0621 IH-7041
1-800-295-5510
uline.com
π
H-7041, H-8546, H-8547
WINDPRO
®
HEAVY DUTY
SNAP EDGE SIGN
PARTS
TOOL INCLUDED
Base x 1
Frame x 1
Two-holed Washer x 2
(Ships with base)
Nut x 4
(Ships attached to frame)
ASSEMBLY
Wrench
NOTE: Remove washers and nuts before
assembling sign.
1. Insert screws on bottom of frame through top of
base. (See Figure 1)
2. Place two-holed washer onto screws at bottom of
base. (See Figure 2)
3. Slide nuts onto screws on bottom of base. (See Figure 3)
4. Use wrench to tighten nuts around screws until snug
against washer. (See Figure 4)
CAUTION! Tighten carefully. When tightened too
much, the base can crack.
Figure 1
Figure 2
Figure 3
Figure 4
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
