background image

4

About Your 600i2 Interactive Whiteboard System

99-00850-21 A0

Unifi 45 Projector Remote Control

The remote control provides an alternate way to control the system and set up 
your Unifi 45 projector. Use the remote control to access menu options, system 
information and input selection options.

Pen Tray Tools

The pen tray tools include four pens and an eraser. The pens have a rubberized 
grip area, colored to match the four colors of digital ink: black, green, red and 
blue. You can use dry-erase markers instead of the supplied pens, as long as 
they are a similar shape, do not scratch or mark the surface of the interactive 
whiteboard and are reflective to infrared light. If the pens you provide don’t reflect 
infrared light, the pen tray sensor might not detect the presence of the pen. 
EXPO® markers make excellent substitutes.

NOTE: 

Pens from earlier interactive whiteboards weren’t designed to reflect 

infrared light, so the sensors may not detect them reliably. You can wrap light-
colored tape around the pen to improve the reflection of infrared light and help 
with tool detection.

The eraser resembles a rectangular chalkboard eraser. You can use a substitute 
eraser, provided it has a similar shape, does not scratch or mark the surface of 
the interactive whiteboard and reflects infrared light.

Optional Accessories

For information on optional accessories, contact your 

authorized SMART reseller

.

Height Adjustable Wall Mount (HAWM-600i2)

Your interactive whiteboard system installed on a Height Adjustable Wall Mount can be lowered to young 
students’ reaching range and raised for teachers or taller students. Maximum vertical travel on the wall mount is 
20" (51 cm). The wall mount locks at its highest point.

Mobile Floor Stand (FS600i2)

You can use the floor stand with your interactive whiteboard system for travelling or mobile presentations. 
Assemble the mobile stand free-standing or tethered to the wall. To move the floor stand, partially disassemble 
the unit, install the casters and roll it to a different location.

USB Speakers (SBA)

Your interactive whiteboard system requires an audio system to deliver 
presentations with sound. The audio system consists of a pair of 15-watt, stereo-
amplified speakers with a two-port USB hub and a volume control knob. You will 
require an RCA plug to 3.5 mm audio jack cable long enough for your installation 
conditions (not included).

NOTE: 

SBA speakers are not directly compatible with the HAWM-600i2 

Height Adjustable Wall Mount and should not be installed on the wall mount. 
SBA speakers must be installed directly on the wall in a manner that does not interfere with the wall mount.

Содержание SmartBoard 600 Series

























































Отзывы: