SMART SmartBoard 600 Series, Руководство пользователя

Страница: 24 / 56

16 Connecting Your 600i2 Interactive Whiteboard System 99-00850-21 A0
4. On your ECP, connect your audio cable (not included) with the 3.5mm plug to the audio input jack next to
the VGA input connector.
5. Connect the other end of your audio cable (not included) to your computer’s audio output.
To connect video outputs from your host and guest computer to your projector and ECP inputs
Connecting video outputs from your computers to your
projector and ECP inputs
1. Make sure you have VGA cables (not included) long
enough to connect your host computer to your Unifi 45
projector and your guest computer to your ECP.
2. Connect the VGA cable (not included) for your host
computer to the input marked "Computer 2" on your
projector.
3. Pass the VGA cable from your projector into the cable
channel’s upper end on the projector boom. Pass the
VGA cable through the cable channel’s lower end and
then pass the cable behind the SMART Board
interactive whiteboard to your host computer.
4. Connect the other end of the VGA cable to your host
computer’s video output connector.
5. Connect the VGA cable (not included) for your guest
computer to the VGA input connector on the bottom of
your ECP.
6. Connect the other end of the VGA cable to your guest
computer’s video output connector.
IMPORTANT
Only use the input marked "Computer 1" on your projector to connect the ECP harness cable.