CHAPTER 2
INSTALLING THE DISPLAY
17
can use additional hardware to transfer some of the weight to the floor.
The display comes with a WM-SBID-200 wall mount. SMART recommends using this wall mount to
install the display on a wall.
If you choose a third-party option rather than one of SMART’s mounting options, be sure the wall
mount can accommodate the display’s dimensions and support the display’s weight as well as the
weight of any attached accessories.
Mounting the display
Mount the display following the included installation instructions. In addition, consider the
following:
l
Mount the display vertically (90° relative to the floor plus or minus 2° for tolerance) and in
landscape orientation. SMART doesn’t support mounting the display at other angles or in
portrait orientation.
l
Use the M8 bolts included with the wall mount to fasten the bracket.
CAUTION
Do not over-tighten the bolts. Use 97.36–177.01 in-lb. (11–20 N·m) fasten force.
l
Because the receptacles might not be easily accessible after you mount the display, consider
connecting cables for power, room computer and other devices while the display is still in its
packaging (see
