CHAPTER 1
WELCOME
5
For more information about the PCM8 series of SMART OPS PC modules, see
CAUTION
l
The accessory slot’s maximum available power is 60 W. The slot is not a limited power
source. To reduce the risk of fire, make sure that accessories connecting to the slot satisfy
the fire enclosure requirements of IEC 60950-1 and/or IEC 62368-1.
l
Do not remove the OPS PC module or other devices from the accessory slot while they are
turned on.
NOTE
Unlike with older SMART Board interactive displays, you don’t need to install an AM30, AM40, or
AM50 appliance in the accessory slot to use the iQ experience on SMART Board 7000R and
7000R series displays. The iQ experience is embedded on these displays (see
page 3). For this reason, SMART doesn’t recommend installing AM30, AM40, or AM50 appliances
in these displays’ accessory slots.
Convenience panel
The convenience panel contains buttons for turning the display on
and off, controlling the volume, freezing and unfreezing the screen,
and showing and hiding a screen shade. It also includes connectors
for USB peripherals and a computer or other input source.
Proximity sensors
The proximity sensors are located in the top-left and top-right corners
of the display’s frame.
The proximity sensors can detect people up to 16' (5 m) away when
the display is in Standby mode.
When the proximity sensors detect people in the room, the display
either turns on or is ready to turn on, depending on how it’s configured.
