SMART Rear Projection SMART Board 1800, Руководство по установке

Страница: 45 / 62

RPSB 1800/1802 Installation Guide
39
Completing the Installation
To complete the installation of your RPSB 1800 or 1802, you must replace the rear access
panel and lower baffle door you removed earlier, install the SMART Board Software on the
internal computer, and, finally, configure and orient the SMART Board.
To integrate the video camera shelf that comes with the RPSB 1802 (or has been ordered for
your RPSB 1800), turn to the video camera integration instructions in Appendix C.
Replacing the Rear Access Panel and Lower Baffle Door
NOTE : If the design of your projector is such that it protrudes beyond the rear of the cabinet,
you will not be able to replace the rear access panel.
Rear Access Panel
Lower Baffle
Door
1. Use the 1/8" Allen key to replace the four screws that attach the rear access panel and
lower baffle door to the cabinet.
2. Tighten the screws.
Installing the SMART Board Software
Every RPSB comes with two pieces of software: the SMART Board driver and SMART
Notebook. These two programs are combined in a single executable called SMART Board
Software.
The SMART Board driver activates your RPSB, allowing you to use your finger as a mouse,
annotate over an application with electronic ink, and use the new generation of Board-aware
applications. SMART Notebook allows you to create, organize and save notes on either a
Rear Projection SMART Board or at your workstation and then send those notes to a printer. A
full range of annotation tools are available to enable you to create a variety of annotations. You
can also use Notebook commands to export and import both graphics and text to and from
other Windows applications and your Notebook file. Refer to the
SMART Board User’s Guide
and the online Help for each program for comprehensive instructions on their use.